Skip to main content

Bike Brains: Creating and Applying the Vinyl


I began by vectorizing my brain bike helmet drawing in adobe illustrator then imported the file into rhino 

After importing the drawing i exploded the shape and began marking all the points to find where i could cut the shapes in order to prevent issues with the vinyl bubbling or warping on the compound curve of the helmet.


I then began to start cutting up the lines that make up the texturing of the brain and disconnecting them from the outline of the brain to reduce overall stretch stress on the vinyl sticker.


I then also transformed my three sister mountain sketch into vector through Illustrator and began to search for a place to integrate these mountain lines into the brain.


Here is the design after some alterations to include the silhouette of the mountains mimicking the brain texture.


I then went over the outline of the brain breaking up the perimeter with circles using the arc tangent to other curves tool.



I then added a occipetal lope to my brain and a stem to make it look a little more brain like using the control point curve and  handle curve tools, the 2D model is finished.

Here is a concept render of the vinyl on the helmet created in Rhino.


Here i have loaded up my .Ai file the "Sure Cuts Alot 3" program, with a regular and mirrored version to apply to the both sides of the helmet.


The vinyl plotter begins making weird sci-fi sounds and plotting...


Once cut, I painstakingly weeded the vinyl ans cut it out.


I bought this "Glad press n seal" from my local grocery store as i read its a cheap and effective transfer adhesive for vinyl. Too bad my vinyl is cut so thin and the adhesive did not work whatsoever to pick up the vinyl pieces for transfer. :'c


So i then got a bunch of strips of masking tape and applied it for transfer.


Here's the masking tape with collected vinyl applied to the helmet.


And finally after some very carefull surgery we are left with just the vinyl, my technique of breaking up all the pieces sort of worked though the brain has slightly shrunken in size due to the compound curve and some pieces of vinyl were destroyed in the transfer.


Here is helmet on my head, quite happy with the result though i think my brain may be a bit small aha... this was a great learning experience, i hope to use the plotter in my future projects.

Comments

  1. Bryan Cera15 October 2017 at 17:39

    Ahhhh, I can't believe how well this turned out! You did a fantastic job. Clever use of AI for grabbing the geometry, and awesome how you divided things up in rhino so the concept would work in vinyl. love it!!

    ReplyDelete

Post a Comment

Popular posts from this blog

Deconstructing an iconic American design

For my reverse engineered object I chose the Zippo lighter, invented by George G. Blaisdell in 1933, the lighter is a staple of american design and symbol of american military history, the design virtually unchanged to this day.  Zippo lighter seperated from shell  I chose this object because It is small and easily deconstructed (mostly: i have to figure out how to take apart some inside parts of the lighter if i choose to model them). looking into the lighter   I also chose this object because I can see the shapes that would make its form in Rhino such as the cylinder flint lighter and the holes drilled through the lighter module that would involve subtracting cylinders from a round cornered hollow rectangle. the lighter component I'm going to have to learn a great deal about three dimensional modelling to execute this correctly but it's going to be fun.
1 comment
Read more

Deconstruction of a lighter: Progress

For my reverse engineered object I had first chosen a lighter though after realizing I could not take it apart without destroying it I chose to the "Bic" lighter, a commonplace lighter sold around the world.  (Flick my Bic? that just sounds wrong) (The Bic Dissembled) Oval shape for the lighter The Lighter  body curve extruded and caped overlapping and oval with and oval trim to the shape  of the  red plastic lighter gas button and metal flame housing Post triming Once curveextruded we have the two approximattive shapes I then created the  springs using the  "spiral command" and counting the spirals on each of the lighter springs./ extruded cylinder for the easy to model flint flint capped and shaded gas  nosel approxamitive  shape Spark wheel: a circle and 60 pointed star Curve extruded rigged parts and center cylinder caped spark wheel Everythin...
1 comment
Read more

Lighter deconstruction: Final Render

The beginning of the end, i started measuring all my pieces with my digital caliper then readjusting my measurements in rhino or creating models from the start point. Here is the "fork" component, creating through tracing an overhead views of the piece, then extruding and stacking them together, this was one of the hardest parts to recreate and was simplified due to very difficult to recreate minuscule details. the "hood" part, another challenging element created with the fillet, bool eon intersection and bool eon difference tools. the wall edge needs to be slightly rounded to be 100% accurate but has proven problematic to achieve. The flint piece, a simple extrude circle. The flint spring a spiral that has been applied the pipe tool The longer fork spring, again a spiral that has been applied the pipe tool The "jet" piece for where the gas exits and flame exists, another update from the prev...
1 comment
Read more